Skip to main content
Australia · festival-ritualExplore modeNo playable versionlow Confidence

Kandomarngutta (Bullroarer) (Australia)

Kandomarngutta
No playable version

This simulation would not reflect the traditional rules, so we do not offer a playable arena for it. The rules and sources below are the real record.

Inventory of Apparatus & Specifications
PlayersI
any number, individually
Recommended AgeII
all ages (post-school and K-12) where documented as unrestricted
DurationIII
not stated in the entry
Playing SpaceIV
not stated in the entry
EquipmentV
«a bullroarer — a flattened, spindle-shaped piece of wood roughly 8-12 cm long and 5 cm wide, with a hole drilled at one end for a length of twine.»
From the corpus entry
Region of origin
Victoria; also Bloomfield River, Lower Tully and Cape Grafton, north Queensland
Community
Peoples of Victoria (kandomarngutta); regional counterparts recorded as teripa (Bloomfield River), chachalmo (Lower Tully) and birbobirbo (Cape Grafton), north Queensland
Status
living
IllustrationApparatus Blueprint & Physical Topology
Traditional Playing ApparatusBoard geometry not shown
Attested Materials:a bullroarer — a flattened, spindle-shaped piece of wood roughly 8-12 cm long and 5 cm wide, with a hole drilled at one end for a length of twine.
Formal Spec →

Overview

Kandomarngutta is a bullroarer: a flat, spindle-shaped piece of wood tied to a length of twine and swung overhead to produce a roaring, humming sound. Its status is not uniform across Australia — in the regions this entry documents it was used as a plaything, while the source is explicit that in other regions the bullroarer carries, and carries today, restricted cultural significance.

Origin & Region

In parts of Victoria, a bullroarer called kandomarngutta — a thin, oval piece of wood about 10 cm long and 5 cm wide, tied to string — was swung to produce a humming noise. In the north-west central districts of north Queensland, bullroarers were used by people of any gender and age as playthings, unengraved though occasionally painted, 8-15 cm long, and recorded under further regional names: teripa at Bloomfield River, chachalmo at Lower Tully, and birbobirbo at Cape Grafton.

Players & Materials

  • Players: any number, each swinging their own.
  • Equipment: a bullroarer — a flattened, spindle-shaped piece of wood roughly 8-12 cm long and 5 cm wide, with a hole drilled at one end for a length of twine.

Objective

Swing the bullroarer to produce a sustained roaring or humming sound.

Rules

1
H

old the twine attached to the bullroarer.

2

Swing the bullroarer rapidly overhead in a circular motion.

3

With sufficient speed, the blade alternately presents its flat surface and sharp edge to the air, producing the characteristic humming or roaring sound.

4

the source gives no competitive scoring or win condition — this is documented as a sound-making activity, not a contest

Variants

Experimenting with different bullroarer sizes and thicknesses changes the sound's pitch and character.

Cultural Notes

The source is explicit that the bullroarer's status is not uniform: in the regions and communities documented here (Victoria; north-west central Queensland) it is recorded as a general plaything. In other parts of Australia, not covered by these examples, the bullroarer carries special restricted significance and historically was not treated as a toy. The source itself states that, although bullroarers are sold as souvenirs, their significance in a given region may be restricted to particular people, and recommends checking with local elders before using this activity as part of any program. This entry follows the source's own documented examples and does not extend them to regions where the object's use is restricted.

Content Advisories

  • injury-risk: a wooden object is swung rapidly at speed near other people; the source notes safety must be considered throughout preparation and use, and that players should spread out and stand back from the swinger.
  • cultural-restriction: the bullroarer carries special, restricted cultural significance in parts of Australia outside the specific regions this entry documents; the source recommends checking with local elders before this activity is used in any program.

Sources

  1. [English / Australian Indigenous languages] Yulunga: Traditional Indigenous Games — Dr Ken Edwards with Troy Meston; Australian Sports Commission (Australian Government), Canberra. Language: en with source-language game names. https://www.sportaus.gov.au/yulunga (complete card set, 262 pp., card at p. 96). Accessed 2026-08-18. Type: national statutory authority (tier 1). Notes: the card's Background section is the ethnographic account and is what this entry reports as traditional; its Game play section is the Commission's modern school adaptation and is reported here only as adaptation.
Share Heritage Game

Share documented rules for Kandomarngutta (Bullroarer) (Australia) — Traditional Game with friends